Paint categories

2K Polyurethane Coatings

2K polyurethane paint is a two-pack finish: you mix a base with a curing agent, and the film cures by chemical reaction instead of drying in air. Marindec's Polyurethane UHB 7:1 is a high-build, aliphatic acrylic polyurethane finish coat, mixed 7 parts base to 1 part curing agent by volume. It is listed in black, H07 green and A58 protea, in 5L packs with A and B components.

Key figures from the data sheet

PropertyPolyurethane UHB 7:1
TypeTwo pack, high build, aliphatic acrylic polyurethane finish coat
Mix ratio7 parts base to 1 part curing agent, by volume
Pot life at 23 °C± 4 hours
Dry film thickness (DFT) per coat35–45 µm (75–95 µm wet)
Theoretical coverage12 m² per litre at 40 µm DFT; 50–70% less in practice
Touch dry± 3 hours
Hard dry± 8 hours
Full cure± 7 days
OvercoatAfter 6 hours minimum
ApplicationAirless spray preferred; air spray; brush or roller for small areas only

The surface must be dry, free of dirt, dust and oil, and at least 3 °C above the dew point. See the steel surface preparation guide.

Primer and thinner

The data sheet calls for a two-pack high-build primer under this finish, not a single-pack alkyd primer such as FPW15. The 2K primer isn't listed on the site, so ask for it with your quote.

Thinning isn't recommended. If you must, use 2K Polyurethane HB7:1 Thinner, at most 15%, and clean equipment with PU Cleaning Solvent. See all paint thinners.

Mix only what you can use

  1. Add the curing agent to the base at 7 parts base to 1 part curing agent by volume, and mix thoroughly.
  2. Mix only what you can apply within the pot life, about 4 hours at 23 °C.
  3. Apply 35–45 µm dry film per coat and check it as you go: see the film thickness guide.
  4. Wait at least 6 hours before the next coat. Full cure takes about 7 days.

2K polyurethane or enamel?

Choose 2K polyurethane paint when the finish has to keep its colour and gloss outdoors: aliphatic polyurethanes are the type chosen for weathering. Choose an industrial enamel when turnaround matters more. Fast Dry Enamel is touch dry in about 10 minutes, against about 3 hours here.

2K polyurethane vs enamel vs epoxy compares them side by side, and how to paint structural steel sets out complete systems.

Frequently asked questions

What is 2K polyurethane paint?

A paint supplied as two components, a base and a curing agent, which you mix just before use. The mixed paint cures by chemical reaction. Marindec's is an aliphatic acrylic polyurethane finish coat, mixed 7:1 by volume.

How long does 2K polyurethane take to dry?

Per the technical data sheet: touch dry in about 3 hours, hard dry in about 8 hours and full cure in about 7 days. Wait at least 6 hours before the next coat.

Which primer goes under 2K polyurethane paint?

A two-pack high-build primer, as the technical data sheet specifies. Don't use a single-pack alkyd primer under it. The 2K primer isn't listed on the site: ask for it with your quote. Request a 2K high-build primer

Are you a 2K urethane coating manufacturer?

Yes. Marindec makes its 2K polyurethane coatings in Alrode, Alberton (Gauteng). For a price, send the colour and quantity in a quote request. Quotes usually come back the same working day. Request a quote

Where can I buy 2k polyurethane coatings in South Africa?

Direct from the manufacturer. Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas

Where we supply: Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas