Paint categories

Enamels

Industrial enamel paint is a single-pack gloss finish coat for primed steel and other prepared surfaces. Marindec makes Transport Enamel, a medium hi-build gloss enamel in 200L drums, and the Fast Dry, High Gloss and Super Gloss enamels listed below. For a quick dry enamel, use Fast Dry Enamel, touch dry in about 10 minutes; for a primer and finish in one, use AGRIP30+. The table compares every enamel Marindec lists.

Which Marindec enamel?

EnamelDrying (data sheet)Dry film thickness (DFT) per coatChoose it for
Fast Dry Enamel (39 series)Touch dry ± 10 min; hard dry ± 4 h, or ± 1 h for the spray grade; overcoat within 2 h20–45 µmQuick turnaround on primed steel. Spray or dip; brush only on small areas. 5L, 25L and 200L
Transport Enamel (43 series)Touch dry ± 45–60 min; hard dry ± 4–8 h; overcoat within 3–4 h35–50 µmA medium hi-build gloss enamel. White, 200L; a +MZAP grade is also listed
AGRIP30+ High Build (45 series)Touch dry ± 10–30 min; hard dry ± 3–16 h, depending on the wet film; overcoat within 2–3 h20–45 µmPrimer and finishing enamel in one, with an anti-corrosive MZAP additive. 5L and 25L
High Gloss EnamelTouch dry 3–6 h; hard dry 12–16 h; overcoat 16–18 h2 coats at 35 µm, or 1 coat at 60 µmVery high gloss on wood, steel and masonry, inside or out (SABS 630 Grade 2). 5L and 200L
Super Gloss EnamelTouch dry 4 h; hard dry and overcoat 18 h, at 25 °C25–35 µmDecorative long oil alkyd gloss over an undercoat. Not for bare metal or chemical exposure. 5L

Quick dry enamel for steel

Fast Dry Enamel is Marindec's quick dry enamel: a single-pack modified alkyd that takes the next coat within 2 hours, so a part can be primed and topcoated in one shift. Prime bare steel first. The data sheet lists fast dry primers such as ZPPW15, etch primer or universal undercoat.

Thin and clean Fast Dry Enamel with FD thinner or General Purpose Quick Dry thinner. Transport Enamel takes General Purpose Quick Dry thinner. See all paint thinners.

Colours

Fast Dry Enamel is listed in colours such as signal red A11, maroon A01 and light grey G29 (SANS 1091), and moss green RAL 6005. Most other SANS and RAL colours are made to order. See how to order industrial enamel in a specific colour.

Enamel or 2K polyurethane?

For exposed steel that has to keep its colour for years, a 2K polyurethane paint holds its gloss in sun better than an alkyd enamel, but cures more slowly. How to paint structural steel sets out primer and topcoat systems by environment.

Frequently asked questions

What is industrial enamel paint?

A single-pack gloss finish coat, applied over a primer on steel and other prepared surfaces. It dries in air, so unlike a two-pack coating there is no curing agent to mix in.

What is quick dry enamel?

An enamel that dries in minutes rather than hours. Marindec's Fast Dry Enamel is touch dry in about 10 minutes and takes the next coat within 2 hours; the spray grade is hard dry in about an hour.

Does enamel paint need a primer?

On bare steel, yes. The Fast Dry Enamel data sheet lists fast dry primers such as ZPPW15, etch primer or universal undercoat, and Super Gloss Enamel shouldn't go on bare metal. AGRIP30+ needs no separate primer unless you need a higher film build.

How do I get a price for industrial enamel?

Send the product, colour code and volume in a quote request. Quotes usually come back the same working day. Request a quote

Where can I buy enamels in South Africa?

Direct from the manufacturer. Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas

Are technical and safety datasheets available for enamels?

Safety data sheets (SDS) are published on 2 of the product pages in this range. Technical data sheets (TDS) are available on request.

Quick dry and gloss enamels (listed under Topcoats)

Where we supply: Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas