Industrial Paint for Factories & Manufacturing

On a production line, paint has to dry fast, apply consistently batch after batch, and suit the way you apply it: brush, spray or dip. Marindec manufactures fast-dry primers and enamels for OEMs, fabricators and factories, with spray and dipping grades in 200L drums.

Products by application

ApplicationProductKey figures (TDS)
Primer on fabricated steelFPW15 Fast Dry Primer; spray and dipping grades20–35 µm; touch dry ~10 min; overcoat within 2 h
Finish coat on products and machineryFast Dry Enamel in SANS and RAL colours20–45 µm; touch dry ~10 min; suitable for dipping
Textured finish that hides surface marksHammertone25–35 µm; touch dry ~15 min
Ovens, heaters, exhaustsHeat Resistant AluminiumContinuous dry heat up to 540 °C
Aluminium and non-ferrous partsEPS15 Etch Primer10–15 µm; self-etching; overcoat after 1 h
Premium exterior finish2K Polyurethane35–45 µm; very good weathering

Keeping the line running

Inside the factory

For the building itself: Floor & Stoep paint for floors and walkways, Type 2 road marking paint for demarcation lines, and anticorrosive systems for structural steel. Fabrication shops priming structural steel will find full systems under steel fabrication.

Supply and delivery

Marindec manufactures in Alrode, Alberton (Gauteng), for collection or delivery nationwide, with regular supply to Gauteng, Mpumalanga and the Western Cape. Production-line primers and enamels come in 200L drums. See delivery and supply areas.

Request a quote with the equipment or area, the environment and the volume. Quotes usually come back the same working day.