Road Marking
Marindec road marking paint is a fast-drying, modified alkyd paint made to SANS 731-1 for lines on bituminous roads. The technical data sheet gives no pick-up in under 15 minutes and a hard dry of 45 minutes. We make it in Alrode, Alberton, and list it here in white and yellow 5L tins. 200L drums are available for contract volumes.
Key figures from the data sheet
| Property | Value |
|---|---|
| Binder | Modified alkyd, suitable for bituminous roads |
| Standard | SANS 731-1 |
| Dry film thickness (DFT) | 150 µm on a new road; 75 µm when re-marking |
| Theoretical coverage | 4–5 m² per litre at 150 µm DFT |
| Volume solids | ± 46% |
| No pick-up | Under 15 minutes |
| Hard dry | 45 minutes |
| Application | Brush, roller or spray |
| Surface | Clean, dry and free from gravel |
How much road marking paint you need
At 150 µm, a 5L tin covers about 20–25 m² in theory. On a 100 mm line, that is roughly 200–250 metres of line per tin. Re-marking at 75 µm uses about half as much paint per metre.
Rough or porous surfaces and spray losses reduce real coverage, so order extra.
Applying it
- Clean the surface and remove gravel and loose material. It must be dry.
- Apply the full film thickness by brush, roller or spray. Thin lines wear out sooner under traffic.
- Keep traffic off until the paint is past the no-pick-up time, and ideally until it is hard dry.
Ordering for a contract
Marindec is a road marking paint manufacturer, so you buy direct from the factory in Alrode. Check your specification against the data sheet first: the specification check guide goes through it line by line.
The SANS 731-1 road marking guide covers Type 1 and Type 2 paints and application on site. For larger volumes, see bulk paint supply.
Frequently asked questions
Is your road marking paint made to SANS 731-1?
Yes. The white and the yellow are both made to SANS 731-1, and the certificate is available on request. SANS 731-1 road marking guide
What is the price of road marking paint?
We quote each order, because the price depends on colour, volume and pack size. Send those, with the surface you're marking, in a quote request. Quotes usually come back the same working day. Request a quote
Are you a road marking paint manufacturer in South Africa?
Yes. Marindec makes its road marking paint in Alrode, Alberton (Gauteng), and sells it direct.
How quickly does road marking paint dry?
The data sheet gives no pick-up in under 15 minutes and a hard dry of 45 minutes. It doesn't state a test temperature, so if your specification sets one, send it to us before you order. Check a specification against the data sheet
Do you make water-based road marking paint?
No. Marindec road marking paint is solvent-based. If a specification calls for a water-based or thermoplastic material, this paint isn't a match.
Where can I buy road marking in South Africa?
Direct from the manufacturer. Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas
Are technical and safety datasheets available for road marking?
Safety data sheets (SDS) are published on 2 of the product pages in this range. Technical data sheets (TDS) are available on request.
Where we supply: Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas