Paint categories

High Build Anti-Corrosive Enamels

AGRIP30+ is a fast-drying, single-pack primer and finishing enamel in one, based on a modified acrylate resin with an anti-corrosive MZAP additive. It goes onto prepared steel without a separate primer, at 20–45 µm dry film per coat, and takes the next coat within 2–3 hours. It is listed in white, signal red A11, China green and Capri blue (RAL 5019), in 5L and 25L.

Key figures from the data sheet

PropertyAGRIP30+ High Build
TypeMedium hi-build, fast drying, single-pack primer and finishing enamel
Dry film thickness (DFT) per coat20–45 µm (100–150 µm wet)
Theoretical coverage8 m² per litre at 40 µm DFT; 50–70% less in practice
Touch dry± 10 to 30 minutes, depending on the wet film
Hard dry± 3 to 16 hours, depending on the wet film
OvercoatWithin 2 to 3 hours
ApplicationAirless spray preferred; air spray; dipping; brush or roller for small areas only

The steel must be dry, free of dirt, dust and oil, and at least 3 °C above the dew point. See the steel surface preparation guide.

When to choose it

AGRIP30+ saves a coat on exterior steel where a separate primer would slow the job. Where a part has to be handled within the hour, a primer under Fast Dry Enamel spray grade is quicker. How to paint structural steel and repainting mining machinery compare the systems.

Frequently asked questions

Does AGRIP30+ need a primer?

Not usually. The technical data sheet says no undercoat is required unless you need a higher film build; for that it names ZPPW50 primer or Universal Under Coat 45.

How quickly does AGRIP30+ dry?

Touch dry in about 10 to 30 minutes and hard dry in about 3 to 16 hours, depending on the wet film applied. Overcoat within 2 to 3 hours.

Which thinner goes with AGRIP30+?

FD or QD thinner, for viscosity adjustment and cleaning. Airless spray needs no thinning; air spray takes at most 10%, and brush or roller on small areas at most 15%.

How do I get a price for AGRIP30+?

Send the colour, pack size and quantity in a quote request. Quotes usually come back the same working day. Request a quote

Where can I buy high build anti-corrosive enamels in South Africa?

Direct from the manufacturer. Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas

Are technical and safety datasheets available for high build anti-corrosive enamels?

Safety data sheets (SDS) are published on 4 of the product pages in this range. Technical data sheets (TDS) are available on request.

Where we supply: Made in Alrode, Alberton (Gauteng), for collection or delivery nationwide. We regularly supply customers in Johannesburg, Pretoria, Boksburg and Centurion (Gauteng), Secunda (Mpumalanga), and Cape Town and Malmesbury (Western Cape). Delivery and supply areas